Plan Review Level 2

• Commercial Alteration / Tenant Build-Outs
• Shell Permit/White Box (aka Vanilla Box)
• Plan Review Level 0
• Plan Review Level 1
• Plan Review Level 2
• Plan Review Level 3

This level is applicable to tenant spaces that incorporate more extensive interior alterations* or when the use or occupancy of the tenant space is changing which requires the space to be brought up to today’s standards**.

* Extensive interior alterations: Removal of existing walls, new walls, increased occupancy load, alterations to plumbing, electrical or mechanical systems etc.

**Today's standards: Updating or adding restrooms to today’s accessibility codes.

This level is restricted to build-outs that do not require an architect or engineer's seal. Please review Attachment “C” to determine if an architectural seal is required.

Items Required to be submitted for a Building Permit – LEVEL 2

1. A key plan that details the footprint of the building and the location of the tenant space.
   (available from the owner or landlord)
2. A building permit application form.
3. An asbestos report completed by a company licensed in the Commonwealth of Virginia.
   (Applicable to all buildings or tenant spaces built before January 1, 1985)
4. Fresh air calculations as required in the International Mechanical Code
5. Two sets of plans drawn to scale with the following information on the plans:
   • The name of the project
   • The address of the project and the suite number
   • The name, address, phone number and occupation of the plans designer
     (Persons who can prepare the drawings include the owner, a contractor, or a professional designer.)
   • The design code and edition under which the plans have been designed (currently the 2009 I-Codes)
   • The current and proposed use group classification
   • The construction type classification of the building and tenant space
   • The square footage area of the tenant space
   • The maximum design occupant load of the tenant space
   • Specify if the building is sprinklered
   • A dimensioned floor plan showing the perimeter measurements and all areas within (Detail B-1 )
   • The location of the exit lights and the emergency lights (Detail B-1)
   • A full wall detail (Detail B-2 or Detail B-3 )
   • A list of all fire-rated assemblies with full details
   • All accessibility details required by the accessibility code
     Examples: lever handles, ramps, toilet rooms, water fountains, door sizes
     (Detail B-4 & Detail B-5 )
   • The location of the toilet facilities, water fountain and the service sink (Detail B-1 )

*The items above are a general list of requirements.
Other details or information may be required once the plan review has been completed for the tenant space to be in compliance with the codes.

Permit Applications & Instructions – LEVEL 2

Application	Word Format	PDF Format
Building Permit Pre-Application (updated June 2012)
Electrical Permit Applications (updated August 2008) * Note: Please read new electrical permit procedures before completing your electronic permit.
Fire Protection Permit Application (updated 2008)
Hazardous Materials Permit Application
Mechanical/Gas Permit Application (updated August 2008)
Plumbing Permit Applications (updated August 2008)
More forms & permits (Development & Permits)